"The Most Beautiful Worker" in Guizhou Province-Hu Fengxiang, Interpreting the Spirit of Model Workers with Wisdom and Sweat
2023-03-14
The secondary recycling of wire drawing oil can be realized from the use of powder selecting machine, thus saving costs and protecting the environment to the greatest extent. To independently invent the scrap monofilament winch, the recovery rate of scrap copper will be more than doubled; Then to study and improve the drawing die matching tools, so that small wires below 2.0 can be drawn high quality at one time; Hu Fengxiang, workshop director of Guda Cable Group, fully demonstrated what Guda craftsman spirit is with his conscientious and dedicated attitude.
Model worker ingenuity as before
Since engaging in the cable industry in 1999, Hu Fengxiang has always adhered to the principle of learning by doing and learning by doing in his 24-year cable career. He has gone deep into the front line and worked hard. With his excellent professional skills, the working principle of facing difficulties and outstanding achievements, Hu Fengxiang has become a manager of maintaining safe and efficient production in the workshop from copper wire drawing workers in a short period of 7 years.The Guizhou Provincial Federation of Trade Unions was rated as the second "most beautiful worker" in Guizhou Province ".
Looking to hear, asking, solving difficulties and rescuing difficulties
When he entered Guda in early 2016, as an ordinary wire drawing worker in the workshop, Hu Fengxiang kept a close eye on every production process, studied and studied all aspects of the equipment, mastered the operation of the equipment with the fastest efficiency, and worked out a "prescription" for maintaining the equipment ". "When I first arrived in Guda, I was a host operator, mainly responsible for controlling the operation of the equipment. The most memorable time was that one of the equipment was just started for production. I observed that the color of the drawing oil was very dark and gradually dried. It is impossible to carry out circular production. According to my past experience, it costs more than 100,000 yuan to replace the drawing oil once, which will also have a certain impact on the environment. In this case, I put forward feasible suggestions to modify the pipeline in the fastest time, and effectively optimized the production environment. After taking up the post of section chief, he reported to the superior leaders at the first time. By using the powder separator to separate the oil and powder, the oil can be recycled, which not only improves the production efficiency and saves the cost, but also passes the detection of relevant departments, so as to realize the pollution index to the environment to be zero."
Teach people to take responsibility for fishing guard
After taking up the post of director of workshop e and f in 2019, in order to further improve the production efficiency and quality, Hu fengxiang knows that the responsibility is as heavy as mount tai, and has always been in the forefront. he has deeply studied the professional knowledge of cables. he has fully participated in the construction of irradiation projects at the beginning of his tenure. he has to do everything in detail from the collection and arrangement of project data, the training of irradiation equipment operators and the emergency treatment of irradiation equipment, so far, it has trained more than 10 mainframe operators for the company, laid a solid foundation for the development of the enterprise, and provided a strong talent guarantee for the production of Guda high quality cable products.
Hu Fengxiang is using scrap copper recycling trays for recycling.
In view of the time-consuming and laborious problem of manual recovery of scrap copper, Hu Fengxiang is also duty-bound to volunteer and independently research and invent a scrap copper recovery tray composed of three parts: "wire tray cover plate", "quick wire unloading device" and "wire unloading split wire tray main body". The movable tray is adopted instead of manual recovery to solve the problem of low manual recovery efficiency, improve the recovery efficiency by more than 10 times, and save manpower and material resources to the maximum.
Design Drawing of Coil Flip Cover
Design Drawing of Quick Line Unloading Device
Design Drawing for Main Body of Split Line Tray
Efficiency is the booster of enterprise development. Improving product quality and speeding up production efficiency is an important part for enterprises to seize the market. Faced with the problems of low production efficiency, substandard product quality, time-consuming, labor-intensive and labor-intensive process of wire drawing and die distribution, in order to find out the "disease" and find out the main contradictions, Hu Fengxiang devoted himself to the front line of the workshop to study the operation state and production structure of equipment, and finally improved the production process through optimization, the original need for "four aluminum small pull, two processes, 18 to 19 molds" was reduced to only "one aluminum large pull, one process, 13 molds" to complete production, not only saving manpower and material resources, but also significantly improving product output, quality and production efficiency.
"In daily work, optimizing and improving production procedures and efficiency is a cumulative process of improvement. As the first link in cable production, copper wire drawing must ensure that the daily wire drawing output can meet the production needs of enterprises." On the issue of ensuring the supply of wire drawing production, Hu Fengxiang insists on routine inspection before leaving work every day. "A few years ago, during a period of inspection, it was found that the copper wire of the equipment was gone around 9 o'clock in the evening, and there was only one copper puller production equipment. The production efficiency was far lower than the current three sets. In order not to delay the progress, I basically worked overtime until early in the morning. The first thing the next morning was to check the production progress in the workshop."
As an old master who has been working for more than 20 years, Hu Fengxiang is still consistent. He has been stationed in the workshop all the year round and frequently shuttles between various production equipment. He specializes in the attributes and characteristics of copper and aluminum wire drawing in the workshop. He blurts out all the links and processes of copper and aluminum wire drawing in the workshop like a few treasures. He has even volunteered to find solutions in the first place, just like a model worker.
"Therefore, if you don't accumulate small steps or even thousands of miles, you can't become a river without accumulating small flows." After twenty years of learning, perseverance, ordinary persistence, and twenty years of excellence, steady and steady work, Hu Fengxiang has set a benchmark in ordinary positions with his hard work and hard work, and explained with wisdom and sweat What is the most beautiful model worker who deserves it.
# The most beautiful laborer,# craftsman ingenuity,# Guizhou wire and cable factory
Related Documents
Related dynamics
WeChat Sweep to Learn More Guda Information
-
E-mail:guda@188.com
Website:www.xjixo.com
Consumer Hotline:400-8379-000
Wire Anti-Counterfeiting and Red Packet Inquiries:18185354668
-
Sales Hotline：0851-34754829、0851-34754819
-
0851-34754816
-
After-Sales Service:17630129055
Recruitment Hotline:18385386544
Advertising Cooperation:18166782513
Address: 02-04, 02-06, Xiayun Industrial Park II, Liyang High-Tech Zone, Pingba District, Anshun City, Guizhou Province
Copyright© Guda Wire and Cable (Group) Co., Ltd. 2024. Website Construction: www.300.cn - GuiYang | Cloud News | City Branches | 
贵公网安备 52040002000107号
电缆.网址
SAF Coolest v1.3.1.2 设置面板 PJBSD-ZDIA-SDXZE-ZQZ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page